Design of Halbach Permanent Magnet External Rotor Machine with Reuse & Recycle Magnet Concepts for Automotive Applications - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2019

Design of Halbach Permanent Magnet External Rotor Machine with Reuse & Recycle Magnet Concepts for Automotive Applications

Conception d'une machine à rotor externe de type Halbach pour l'électromobilité considérant la réutilisation et le recyclage des aimants permanents

Résumé

Electric vehicles (EVs) or Hybrid electric vehicles (HEVs) offer many advantages over the conventional IC engine vehicles. According to recent trends, the demand for efficient (H)EVs is expected to grow significantly. For a high-power range, permanent magnet based motor technology has been the preferred choice for motors deployed in (H)EVs. Growing demand of highly efficient motors is in direct correlation to the demand of strong magnets (NdFeB or SmCo), which uses rare earth elements (REE). The availability and supply of REEs specially heavy REEs is very critical. Therefore, the aim of this doctoral thesis is to design an outer rotor Halbach motor for a (H)EV application with easy recycling and reuse of the magnet. Further, the project aims to investigate and propose the manufacturing of a Halbach magnet used in a high power motor EV applications.Firstly, the manufacturing of Halbach magnet using a sintered and a bonded NdFeB magnet was investigated. The study shows that the manufacturing of Halbach array using a bonded magnet is much easier and more cost effective than the sintered magnet. The characterisation of a bonded NdFeB magnet used for manufacturing a Halbach magnet was also performed. Various recycling routes for both sintered and bonded magnets were analysed and it can be inferred that bonded magnets are much easier to recycle in a cost effective and environment friendly manner. The thesis also proposes the recycling route for the bonded magnet used in the motor.Secondly, a motor with bonded Halbach magnet was designed using 2D and 3D FEM. To achieve a highly efficient and compact motor, fractional slot tooth coil winding was used. The properties of Halbach magnet was calculated using FEM model and benchmarked against the analytical model. The results obtained from the two approaches were in close agreement. Further, the impact of slot pole combinations on motor losses and the subsequent torque were investigated, specifically eddy loss (considering all the design constraints). Different strategies to use recycled magnet with lower remanence is also presented. It is shown that using a recycled magnet with increased axial length of the motor could be the best choice considering different factors, specially manufacturing of the Halbach magnet. Based on different parametric studies a design of the motor was proposed and prototype was built. It was demonstrated that a high power Halbach magnet could be built economically using a bonded NdFeB magnet. The airgap flux density of the rotor, measured on the prototype is in close agreement with the calculated values.Additionally, WIRE (Weighted Index of Recycling and Energy) methodology was presented to benchmark different motor designs on the basis of performance and recy- clability. The method developed produces two indices based on:• Ease of motor recyclability considering material, assembly and disassembly of magnets.• Impact of a recycled magnet on the energy consumption of a motor during its operational lifetime.Using both the above indices, one can easily analyse the pros and cons of different motor designs on the basis of recyclability and energy efficiency. The proposed motor design was evaluated using the developed method and it is shown that the motor is easy to assemble and disassemble. In addition, the motor assembly (glue free) enables easy magnet extraction and direct reuse. The evaluated energy index of the motor shows the impact of using a recycled magnet and its viability for EV applications in different scenarios.
Les véhicules électriques (VE) ou les véhicules électriques hybrides (VEH) offrent de nombreux avantages par rapport aux véhicules à moteur à combustion interne classiques. Selon les tendances récentes, la demande en VE(H) efficaces devrait augmenter considérablement. Pour une gamme haute puissance, la technologie des moteurs à aimants permanents a été le choix privilégié dans les véhicules électriques hybrides. La demande croissante de moteurs à haut rendement est en corrélation directe avec la demande d'aimants puissants (NdFeB ou SmCo) utilisant des terres rares. La disponibilité et la production des terres rares sont très critiques particulièrement pour les terres rares lourdes. L'objectif de cette thèse de doctorat est donc de concevoir un moteur Halbach à rotor extérieur pour une application VE(H) avec recyclage et réutilisation faciles des aimants. En outre, le projet vise à étudier et à proposer la fabrication d'un aimant Halbach utilisé dans les moteurs de forte puissance pour application VE.Tout d'abord, la fabrication d'un aimant Halbach utilisant un aimant NdFeB fritté avec et sans liant a été étudiée. L'étude montre que la fabrication d'une configuration de Halbach à l'aide d'un aimant collé est beaucoup plus facile et plus rentable que la fabrication d'un aimant fritté. La caractérisation d'un aimant NdFeB lié utilisé pour fabriquer un aimant Halbach a également été réalisée. Diverses voies de recyclage des aimants frittés et liés ont été analysées; on peut en déduire que les aimants collés sont beaucoup plus faciles à recycler, de manière rentable et respectueuse de l'environnement. La thèse propose également un moyen de recyclage pour l'aimant collé utilisé dans le moteur.Deuxièmement, un moteur à aimant Halbach collé a été conçu en modélisation éléments finis 2D et 3D. Pour obtenir un moteur très efficace et compact, on a utilisé un bobinage à pas fractionnaire. Les propriétés de l'aimant Halbach ont été calculées à l'aide du modèle éléments finis et comparées au modèle analytique. Les résultats obtenus par les deux approches étaient similaires. De plus, l'impact des combinaisons nombre d’encoches-pôles sur les pertes moteur et le couple a été étudié, en particulier les pertes Joule (compte tenu de toutes les contraintes de conception). Différentes stratégies pour utiliser des aimants recyclés à faible rémanence sont également présentées. L'utilisation d'un aimant recyclé avec une augmentation de la longueur axiale du moteur pourrait être le meilleur choix compte tenu de différents facteurs, notamment la fabrication de l'aimant Halbach. Sur la base de différentes études paramétriques, une conception du moteur a été proposée et un prototype a été construit. Il a été montré qu'un aimant Halbach de grande puissance pouvait être construit de manière économique avec un aimant NdFeB collé. La densité de flux d'entrefer du rotor, mesurée sur le prototype, est en étroite concordance avec les valeurs calculées.De plus, la méthodologie WIRE (Weighted Index of Recycling and Energy) a été présentée pour comparer différentes conceptions de moteurs en fonction de leur performance et de leur recyclabilité. La méthode développée produit deux indices basés sur-Facilité de recyclage du moteur en ce qui concerne le matériau, le montage et le démontage des aimants.-Impact d'un aimant recyclé sur la consommation d'énergie d'un moteur pendant sa durée de vie.En utilisant ces deux indices, on peut facilement analyser les avantages et les inconvénients des différentes conceptions sur la base de la recyclabilité et de l'efficacité énergétique. La conception proposée a été évaluée à l'aide cette méthode et on montre que le moteur est facile à monter et à démonter. De plus, l’assemblage moteur (sans colle) permet une extraction facile des aimants et une réutilisation directe. L'indice énergétique évalué du moteur montre l'impact de l'utilisation d'un aimant recyclé et sa viabilité pour les applications VE dans différents scénarios
Fichier principal
Vignette du fichier
JHA_2019_diffusion.pdf (59.82 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-02295220 , version 1 (24-09-2019)
tel-02295220 , version 2 (06-11-2019)

Identifiants

  • HAL Id : tel-02295220 , version 2

Citer

Amit Kumar Jha. Design of Halbach Permanent Magnet External Rotor Machine with Reuse & Recycle Magnet Concepts for Automotive Applications. Electric power. Université Grenoble Alpes, 2019. English. ⟨NNT : 2019GREAT014⟩. ⟨tel-02295220v2⟩
758 Consultations
22 Téléchargements

Partager

Gmail Facebook X LinkedIn More