Numerical modelling of an air-helium buoyant jet in a two vented enclosure - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2018

Modélisation numérique d'un jet flottant air-hélium dans une cavité avec deux évents

Numerical modelling of an air-helium buoyant jet in a two vented enclosure

Résumé

We present numerical results from large eddy simulations (LES) and coarse direct numerical simulations (DNS) of an air-helium buoyant jet rising in a two vented cavity. The geometrical configuration mimics the helium release experimental set-up studied at CEA Saclay in the framework of security assessment of hydrogen-based systems with an indoor usage. The dimension of the enclosure was chosen to ensure a laminar-turbulent transition occurring at about the middle height of the cavity. This study focuses mainly on three key points : the influence of the boundary conditions on the jet development and its interaction with the exterior environment, the validity of the numerical model which is analyzed by comparing the numerical velocity distribution versus the measured particle image velocimetry (PIV) ones, and finally understanding the distribution of air-helium and the stratification phenomenon that takes place inside the cavity. We observe at first that applying constant pressure outlet boundary conditions directly at the vent surfaces underestimates the volumetric flow rate of air entering the enclosure and thus overestimate the helium mass inside the cavity. On the contrary, modelling an exterior region in the computational domain better predicts the air flow-rate entrance and numerical results matches better with the experimental PIV data. It has been figured out that the coarse DNS predictions match better with the velocities PIV measurements, compared to the LES. Numerical prediction of the helium field depicts a homogeneous layer formed at the top of the cavity, with a concentration in good agreement with the theoretical model of Linden et al. 1990. However, the position and the thickness of the layer do not correspond to the theory. This is mainly due to the direct interactions between the buoyant jet and both the solid boundaries of the cavity and the exterior environment. Statistical analysis regarding the buoyancy production of the turbulent kinetic energy (TKE) served to identify the limits of the buoyant jet.
Nous cherchons à modéliser numériquement un jet flottant air-hélium dans une cavité avec deux ouvertures à partir de simulations aux grandes échelles (LES) et de simulations numériques directes (DNS). La configuration considérée est basée sur une étude expérimentale menée au CEA de Saclay reproduisant une fuite d'hydrogène en environnement confiné. La dimension de la cavité a été choisie pour permettre une transition laminaire-turbulent intervenant environ à la mi-hauteur de la cavité. Cette étude porte principalement sur trois points majeurs : l'influence des conditions aux limites sur le développement du jet et son interaction avec l'environnement extérieur, la validité du modèle numérique qui est analysée en comparant la distribution de vitesse obtenue numériquement aux mesures expérimentales (PIV) et, enfin, la compréhension de la distribution air-hélium et le phénomène de stratification qui s'établit à l'intérieur de la cavité. Nous observons dans un premier temps que des conditions limites de pression constante appliquées directement au ras des évents conduisent à une sous-estimation du débit volumique d'air entrant dans la cavité et donc à une surestimation de la masse de l'hélium à l'intérieur de la cavité, ce qui n'est pas acceptable dans un contexte d'évaluation du risque hydrogène. En revanche, la prise en compte, dans le domaine de calcul, d'une région extérieure à la cavité prédit correctement le flux d'air entrant. Les résultats numériques sont alors en bon accord avec les données PIV. Il a été montré que les prédictions de la DNS, par rapport à la LES, concordent mieux avec les mesures de vitesse par PIV. Le champ de concentration prédit numériquement présente une couche homogène en haut de la cavité, dont la concentration est en accord avec le modèle théorique de Linden et al. 1990. Cependant, sa position et son épaisseur ne correspondent pas au modèle. Ceci est principalement dû aux interactions directes entre le jet flottant et, d'une part, avec les limites solides de la cavité et d'autre part, avec l'environnement extérieur. L'analyse statistique concernant la production de la flottabilité de l'énergie cinétique turbulente (TKE) a permis d'identifier les limites du jet flottant.
Fichier principal
Vignette du fichier
2018SORUS023.pdf (51.05 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01777609 , version 1 (24-04-2018)
tel-01777609 , version 2 (25-04-2019)

Identifiants

  • HAL Id : tel-01777609 , version 2

Citer

Elie Saikali. Numerical modelling of an air-helium buoyant jet in a two vented enclosure. Mécanique des fluides [physics.class-ph]. Sorbonne Université, 2018. Français. ⟨NNT : 2018SORUS023⟩. ⟨tel-01777609v2⟩
393 Consultations
70 Téléchargements

Partager

Gmail Facebook X LinkedIn More