Étude des mécanismes de transferts couplés de chaleur et d’humidité dans les matériaux poreux de construction en régime insaturé - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2017

Study of coupled heat and moisture transfer mechanisms in porous building materials in unsaturated regime

Étude des mécanismes de transferts couplés de chaleur et d’humidité dans les matériaux poreux de construction en régime insaturé

Résumé

The aim of this work is to understand the influence of the geometric parameters of envelope eco-materials, such as hemp concrete, on the mechanisms of coupled heat, air and moisture transfers, in order to predict behavior of the building to control and improving it in its durability. For this a multi-scale approach is implemented. It consists of mastering the dominant physical phenomena and their interactions on the microscopic scale. Followed by a dual-scale modeling, microscopic-macroscopic, of coupled heat, air and moisture transfers that takes into account the intrinsic properties and microstructural topology of the material using X-ray tomography combined with the correlation of 2D and 3D images. A characterization campaign of physical and hydrothermal properties of the hemp concrete manufactured in the laboratory was carried. It focused on studying the impact of aging, thermal and hydric state of the material on these intrinsic properties. The results show an excellent thermal insulation and natural moisture regulation capacity of hemp concrete. Then, a microscopic characterization by different imaging techniques was performed. The 3D reconstructions of the real material scanned with X-ray tomography at different resolutions show that hemp concrete has several scales of porosity, ranging from micro-porosity within the binder and hemp shiv to the inter-particle macro-porosity. The hydromorphic behavior under hydric solicitations was studied. The results of the 2D digital image correlation and X-ray tomography coupled with the volumetric image correlation show the nature of the behavior of hemp concrete subjected to different relative humidities. In fact, the hemp shiv undergoes greater deformations than the binder, thus causing changes in the microstructure of the material. On the modeling part, a model of coupled heat, air and moisture transfer in porous building materials was developed using the periodic homogenization technique. The homogenized tensors of diffusion and thermal conductivity were determined numerically. Then, a confrontation between the results of the calculation of the macroscopic diffusion coefficients and the experimental results obtained at the LaSIE was carried out. It highlights the quality of the prediction. In addition, the thermal conductivity of the solid phase was thus deduced. The results obtained in the framework of this PhD thesis have highlighted the influence of the hydric and thermal state of the hemp concrete on these intrinsic properties and its very heterogeneous microstructure. They also revealed the limitations of phenomenological approaches based on the establishment of the balances of mass, amount of motion and energy
Le présent travail a pour objectif de comprendre l’influence des paramètres géométriques des éco-matériaux d’enveloppe, tels que le béton de chanvre, sur les mécanismes de transferts couplés de chaleur, d'air et d’humidité afin de prédire le comportement du bâtiment dans le but de le piloter et de l’améliorer dans sa durabilité. Pour cela, une approche multi-échelle est mise en place. Elle consiste à maîtriser les phénomènes physiques dominants et leurs interactions à l’échelle microscopique. S’ensuit, une modélisation à double échelle, microscopique–macroscopique, des transferts couplés de chaleur, d’air et d’humidité qui prend en compte les propriétés intrinsèques et la topologie microstructurale du matériau moyennant le recours à la tomographie rayon X conjuguée à la corrélation d’images 2D et 3D. Pour cela, une campagne de caractérisation fine des propriétés physiques et hygrothermiques du béton de chanvre confectionné au laboratoire a été réalisée. Elle s’est focalisée sur l’étude de l’impact du vieillissement, l’état thermique et hydrique du matériau sur ses propriétés intrinsèques. Les résultats montrent une excellente capacité d'isolation thermique et de régulation naturelle d’humidité du béton de chanvre. Puis, une caractérisation microscopique par différentes techniques d’imagerie a été effectuée. Les reconstructions 3D du matériau réel scanné au tomographe aux rayons X à différentes résolutions montrent que le béton de chanvre possède plusieurs échelles de porosité, allant de la microporosité au sein du liant et des chènevottes à la macroporosité inter-particulaire. Le comportement hygro-morphique sous sollicitations hydriques a été ensuite étudié. Les résultats de la corrélation d’image numérique 2D et de la tomographie aux rayons X couplés à la corrélation d’images volumiques, montrent la nature du comportement du béton de chanvre soumis à des hygrométries différentes. En effet, la chènevotte subit des déformations plus importantes que le liant, causant ainsi des modifications de la microstructure du matériau. Sur le volet de la modélisation, moyennant la technique d’homogénéisation périodique un modèle des transferts couplés de chaleur, d’air et d’humidité dans les matériaux poreux de construction a été développé. Les tenseurs de diffusion et de conductivité thermique homogénéisés ont été calculés numériquement. Ensuite, une confrontation entre les résultats du calcul des coefficients de diffusion macroscopique et ceux expérimentaux obtenus au LaSIE a été réalisée. Elle met en évidence la qualité de la prédiction. De plus, la conductivité thermique de la phase solide a été ainsi déduite. Les résultats obtenus dans le cadre de ce travail de thèse ont mis en exergue l’influence de l’état hydrique et thermique du béton de chanvre sur ces propriétés intrinsèques, et sa microstructure très hétérogène. Ils ont révélé aussi les limites des approches phénoménologiques basées sur l’établissement des bilans de masse, de quantité de mouvement et d’énergie.
Fichier principal
Vignette du fichier
2017BENNAI101514.pdf (7.89 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-01865834 , version 1 (02-09-2018)

Identifiants

  • HAL Id : tel-01865834 , version 1

Citer

Fares Bennai. Étude des mécanismes de transferts couplés de chaleur et d’humidité dans les matériaux poreux de construction en régime insaturé. Génie civil. Université de La Rochelle; Université Abderrahmane Mira - Bejaïa (Bejaïa, Algérie), 2017. Français. ⟨NNT : 2017LAROS013⟩. ⟨tel-01865834⟩
723 Consultations
1730 Téléchargements

Partager

Gmail Facebook X LinkedIn More