Development of a substructuring approach to model the vibroacoustic behavior of submerged stiffened cylindrical shells coupled to non-axisymmetric internal frames - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2016

Development of a substructuring approach to model the vibroacoustic behavior of submerged stiffened cylindrical shells coupled to non-axisymmetric internal frames

Développement d'une approche de sous-structuration pour la prise en compte de structures internes non-axisymétriques dans la modélisation vibro-acoustique de coques raidies immergées

Résumé

Many works can be found in the literature concerning the vibroacoustic modelling of submerged stiffened cylindrical shells, because of high interest in the industrial domain, in particular for aeronautical or naval applications. However, only a few of them take into account non-axisymmetric internal frames, as for instance engine foundations or floor partitions, that can play a role on the vibroacoustic behavior of the system. That is why a substructuring approach called the Condensed Transfer Function (CTF) approach is proposed in the first part of this thesis. The aim is to take advantage of both analytical models and element-based models, in order to be able to deal with the geometrical complexity, and to calculate at higher frequencies than with element-based methods only. The substructuring method is developed in the general case of thin mechanical structures coupled along curves. A set of orthonormal functions called condensation functions, which depend on the curvilinear abscissa along the coupling line, is considered. This set is then used as a basis for approximating and decomposing the displacements and the applied forces at the line junctions. Thanks to the definition and calculation of condensed transfer functions for each uncoupled subsystem and by using the superposition principle for passive linear systems, the behavior of the coupled subsystems can be obtained. The method is first developed and validated for plates and convergence criteria are defined in relation with the size of the basis of condensation functions. The CTF method is then applied to the case of a submerged stiffened cylindrical shell with non-axisymmetric internal frames. The system is partitioned in 3 types of subsystems: the submerged shell, the axisymmetric frames (stiffeners, bulkheads) and the non-axisymmetric frames. The submerged shell is described by a semi-analytical method based on the Flügge equations in the spectral domain. The axisymmetric frames are described by axisymmetric Finite Element models and the non-axisymmetric frames by Finite Element models. The CTF method is applied to different test cases in order to highlight the influence of non-axisymmetric internal frames on the vibroacoustic behavior of a submerged stiffened cylindrical shell, for different excitations particularly relevant in the naval domain: a point force, an acoustic plane wave, and a random pressure field (such as a diffuse sound field or a turbulent boundary layer for instance).
De nombreux travaux dans la littérature se sont concentrés sur la modélisation vibro-acoustique de coques cylindriques raidies immergées, du fait des nombreuses applications industrielles, en particulier dans le domaine aéronautique ou naval. Cependant, peu d'entre elles prennent en compte des structures internes non-axisymétriques telles que des supports moteurs, des planchers ou des carlingages, qui peuvent avoir une influence importante sur le comportement vibro-acoustique du système. C'est pourquoi une méthode de sous-structuration baptisée CTF est présentée dans cette thèse. Elle est développée dans le cas général de deux structures minces couplées le long d'une ligne. Un ensemble de fonctions orthonormées, baptisées fonctions de condensation, est défini afin d'approximer les forces et déplacements à la jonction entre les sous-systèmes. Des fonctions de transfert condensées sont définies pour chaque sous-système découplé. L'utilisation du principe de superposition, de l'équilibre des forces et de la continuité des déplacements permet de déduire le comportement des sous-systèmes couplés. La méthode est d'abord développée et validée dans le cas de plaques, puis ensuite appliquée au cas d'une coque cylindrique raidie immergée couplée à des structures internes non-axisymétriques. Le système est dans ce cas décomposé en 3 familles de sous-systèmes : la coque cylindrique immergée décrite par une méthode semi-analytique basée sur la résolution des équations de Flügge dans le domaine des nombres d’onde, les structures internes axisymétriques (raidisseurs, cloisons) décrites par éléments finis axisymétriques et les structures non-axisymétriques décrites pas des modèles éléments finis. La méthode CTF est appliquée à différents cas tests afin de montrer l'influence des structures internes non-axisymétriques sur le comportement vibro-acoustique d'une coque cylindrique pour différents types d'excitations pertinents dans le domaine naval : une force ponctuelle, une onde plane acoustique et un champ de pression aléatoire (tel qu'un champ acoustique diffus ou une couche limite turbulente).
Fichier principal
Vignette du fichier
these.pdf (15.29 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01416015 , version 1 (13-12-2016)
tel-01416015 , version 2 (01-02-2019)

Identifiants

  • HAL Id : tel-01416015 , version 2

Citer

Valentin Meyer. Development of a substructuring approach to model the vibroacoustic behavior of submerged stiffened cylindrical shells coupled to non-axisymmetric internal frames. Acoustics [physics.class-ph]. Université de Lyon, 2016. English. ⟨NNT : 2016LYSEI111⟩. ⟨tel-01416015v2⟩
510 Consultations
285 Téléchargements

Partager

Gmail Facebook X LinkedIn More