Development of grain boundaries and phase boundaries in WCCo cemented carbides - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2015

Development of grain boundaries and phase boundaries in WCCo cemented carbides

Développement des joints de grain et des joints de phase dans les carbures cémentés WC-CO

Résumé

WC-Co cemented carbide is a two phase system constituted of a cobalt based binder matrix embedding hard tungsten carbide grains. This material is especially used in fields such as metal cutting or mining, where high mechanical properties are required. Therefore, the microstructure is a key parameter to control to optimize the mechanical properties of the alloy.This work aims at understanding the mechanisms of grain boundary and phase boundary development during sintering, and how they may influence the final microstructure. The effect of the binder content, carbon content and sintering time was especially investigated.Electron BackScattered Diffraction characterization was chosen to conduct this study. First because the precise separation of grains in the resulting images makes possible automation of the measurements, and thus allows a statistical analysis of several microstructural parameters (as grain size, contiguity) on numerous samples. Secondly because orientation data collected by this way make possible the analysis of grain boundary and phase boundary texture. To this end, an automated method was developed for analysis of grain boundaries and estimation of remarkable boundary planes fraction from 2D EBSD measurements.The study of contiguity shows that it does not depend on sintering time or carbon content in the binder, but essentially of the carbide grain volume fraction. This result implies that impingement is the first order parameter in the evolution of contiguity. Grains appear to grow faster and in a larger extent in samples with a carbon rich binder, as well as in high binder content samples. Abnormal grain growth seems to be favored by high binder content in carbon rich samples. All grain boundaries were characterized by a couple of rotation axis and misorientation angle. Three particular rotation axes were identified: [101 ̅0], [21 ̅1 ̅0] and [0001]. They represent around 30% of the total grain boundary surface area. In addition, specific rotations were found to be particularly abundant in the microstructure: [101 ̅0]/90°, [21 ̅1 ̅0] / (48°- 60°- 90°) and [0001]/90°.A study of their geometry suggests that their stability would be due to a particularly coherent boundary plane. A statistical analysis shows that most grain boundaries and phase boundaries have a habit plane parallel to a basal or prismatic plane (about 70% of the total grain boundary surface area and 50% of the total phase boundary area. Finally, a scenario is proposed for the microstructure development model during sintering of cemented carbides on the basis of the results.
Le carbure cémenté (WC-Co) est un système biphasé constitué de grains de carbure de tungstène enrobés dans un liant à base de cobalt. Dans ce matériau composite, qui allie donc la dureté du carbure à la résilience du cobalt, la maîtrise de la microstructure est un paramètre clef pour l’optimisation des propriétés mécaniques.Le but de ce travail est de mettre au jour les mécanismes régissant le développement des joint de grain et des joints de phase lors du frittage. L’effet de la teneur en liant, du taux de carbone et du temps de frittage ont été particulièrement étudiés.Ce travail est basée sur la caractérisation du matériau par EBSD (Electron BackScattered Diffraction), une méthode qui facilite la séparation des grains et donc l’utilisation de techniques d’analyse d’image pour étudier la microstructure. En outre un programme basé sur les données d’orientation des grains collectées par EBSD et permettant l’analyse de la texturation des joints de grain et des joints de phase a été développé pour cette étude.L’étude de la contiguité montre qu’elle ne dépend pas du taux de frittage ni de la teneur en carbone du liant, mais essentiellement de la fraction volumique de liant. Cela implique que l’encombrement et l’imbrication des particules sont les principaux paramètres entrant en compte dans l’établissement de la contiguité. Un grossissement plus rapide et plus marqué a été observé dans les échantillons riches en carbone, ainsi que dans ceux présentant un fort taux de liant. Un grossissement anormal a été observé dans les échantillons riches en carbone et à fort taux de liant. La désorientation aux joints de grains est caractérisée par un couple axe/angle décrivant la rotation liant les deux cristaux. L’étude de la distribution des axes a révélé que trois rotations sont particulièrement abondantes : celles autour de [101 ̅0], [21 ̅1 ̅0] et [0001]. Elles représentent environ 30% de la surface totale des joints de grains. Pour chacune des rotations particulières ont été détectées : [101 ̅0]/90°, [21 ̅1 ̅0] / (48°- 60°- 90°) et [0001]/90°. L’étude de la géométrie de ces joints suggère que leur remarquable stabilité est due au fort taux de cohérence dans le plan de joint. L’analyse statistique des plans de joint de grain et de joint de phase montre que la plupart d’entre eux correspond à un plan basal ou prismatique pour au moins l’un des deux grains (70% environ de la surface totale de joint de grain, et 50% environ de la surface totale de joint de phase). Sur la base de ces résultats, un scénario décrivant l’évolution de la microstructure durant le frittage est finalement proposé.
Fichier principal
Vignette du fichier
PELLAN_2015_archivage.pdf (7.6 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-01319087 , version 1 (20-05-2016)

Identifiants

  • HAL Id : tel-01319087 , version 1

Citer

Maxime Pellan. Development of grain boundaries and phase boundaries in WCCo cemented carbides. Materials. Université Grenoble Alpes, 2015. English. ⟨NNT : 2015GREAI121⟩. ⟨tel-01319087⟩
526 Consultations
1471 Téléchargements

Partager

Gmail Facebook X LinkedIn More