Multi scale modelling and numerical simulation of metal foam manufacturing process via casting - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2016

Multi scale modelling and numerical simulation of metal foam manufacturing process via casting

Modélisation et simulation multi-échelle du procédé de fabrication des mousses métallique par voie de fonderie

Résumé

The objective of this work is to elaborate a new manufacturing process of metal foams via casting by modelling the infiltration and solidification of liquid metal inside a porous medium.However, due to the complexity of this problem the study is divided into two steps. First, at local scale one strut of the metal foam is considered as a capillary tube and the infiltration and solidification of liquid metal inside a cylindrical mould is studied. Second, a macroscopic model of diffusive solidification is derived using the volume average method. The local model is coded in an open source CFD tool and three parametric studies were done where the relations between the infiltration length and time as function of the operating parameters are determined. The modelling of the solidification of liquid metal inside a porous medium is simplified by considering that the mould is fully saturated by liquid metal at rest, solidification occurs by pure diffusion. Local thermal equilibrium (LTE) is considered between the solid and liquid phases of the metal while local thermal non equilibrium (LTNE) is retained between the metallic mixture and the mould. The associated closure problems as well as the macroscopic problem were numerically solved.
L'objectif est d'élaborer un nouveau procédé de fabrication de mousses métalliques par voie de fonderie en modélisant l'infiltration et la solidification d'un métal liquide dans un milieu poreux. La modélisation est faite en deux étapes.Tout d'abord, à l'échelle locale un brin de la mousse métallique est considéré comme un tube capillaire et l'infiltration et solidification d'un métal liquide dans un moule cylindrique est étudiée. Deuxièmement,le modèle macroscopique de la solidification diffusive d'un métal liquide dans un milieu poreux est obtenu par prise de moyenne volumique. Le modèle local est codée dans un outil CFD opensource et trois études paramétriques ont été faites permettant la détermination des relations de la longueur et le temps d'infiltration en fonction de paramètres de fonctionnement. La modélisation de la solidification d’un métal liquide dans un milieu poreux est simplifié en considérant que le moule est complètement saturé par un métal liquide au repos,par suite la solidification se produit par diffusion pure (pas de convection). L'équilibre thermique local (LTE) est considéré entre les phases solide et liquide du métal tandis qu'un non équilibre thermique local (LTNE) est retenue entre la phase métallique et le moule. Les problèmes de fermeture associés ainsi que le problème macroscopique ont été résolus numériquement.
Fichier principal
Vignette du fichier
76604_MOUSSA_2016_archivage.pdf (13.67 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01324481 , version 1 (01-06-2016)

Identifiants

  • HAL Id : tel-01324481 , version 1

Citer

Nadine Moussa. Multi scale modelling and numerical simulation of metal foam manufacturing process via casting. Fluids mechanics [physics.class-ph]. Université Paris Saclay (COmUE), 2016. English. ⟨NNT : 2016SACLC021⟩. ⟨tel-01324481⟩
327 Consultations
706 Téléchargements

Partager

Gmail Facebook X LinkedIn More